This is an old revision of the document!
SSH is enabled by default.
Ethernet required for initial installation.. or, you can use a WiFi dongle.
You must plant a wifi.txt on the eMMC in a specific folder to initiate the WiFi connection process. Would have liked to see a GUI here.
############################################## # EmuELEC # # Retro emulation for Amlogic Devices # # Based on CoreELEC # ############################################## EmuELEC (official): 2.7.1 (Amlogic-ng.arm) EmuELEC:~ # aplay -L null Discard all samples (playback) or generate zero samples (capture) sysdefault:CARD=AMLAUGESOUND AML-AUGESOUND, Default Audio Device iec958:CARD=AMLAUGESOUND,DEV=0 AML-AUGESOUND, IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=AMLAUGESOUND,DEV=0 AML-AUGESOUND, HDMI Audio Output sysdefault:CARD=Multibit Schiit USB Multibit, USB Audio Default Audio Device front:CARD=Multibit,DEV=0 Schiit USB Multibit, USB Audio Front speakers surround21:CARD=Multibit,DEV=0 Schiit USB Multibit, USB Audio 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=Multibit,DEV=0 Schiit USB Multibit, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Multibit,DEV=0 Schiit USB Multibit, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Multibit,DEV=0 Schiit USB Multibit, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Multibit,DEV=0 Schiit USB Multibit, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Multibit,DEV=0 Schiit USB Multibit, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Multibit,DEV=0 Schiit USB Multibit, USB Audio IEC958 (S/PDIF) Digital Audio Output EmuELEC:~ #